Description
Requirements:
- PC and Mac compatible
- Poser 5+ rigged and tested
- Poser 7+ required for master parameter pose dial on 2 of the figures (manual posing is also able)
- Not tested in DazStudio but should work with minor texture and location adjustments for reflection mapping and bump/displacement mapping
- Some pre-parented items may not translate well into Daz Studio, however you can assemble the parts to create your own setup.
- .Obj, .cr2, .pz2, pp2, .png, .jpg formatted files
- Does not require any other purchases
Features:
- Chamber: This is a tall circular room with 4 walls, ceiling and floor. There are columns between the walls. The columns have 4 morphs to move each column out of view for better camera views. The walls can move up and down and out of view.
- Chamber Wall 1: This is an add-on wall for the chamber. It features an iris door and circular corridor behind the iris door. The corridor has top, bottom and right/left walls that can be moved out of the way for better views. The iris door has a master pose dial to open all the iris segments at once.
- Chamber Wall 2: This is an add-on wall with a viewing window and corridor behind the window. Each end of the corridor has a posable door. All the walls, ceiling, floor and doors can be moved out of view for good camera angles.
- Chamber Assem 1: This is a pre-assembled chamber with the addition of (1) Chamber Wall 1, an extra corridor section and extra iris door.
- Chamber Assem 2: This is a pre-assembled chamber with the addition of (4) Chamber Wall 2 figures. The unused doors of the Wall 2 figures have been dropped down out of view.
- Chamber Assem 3: This is a pre-assembled chamber with the addition of (1) Chamber Wall 1 figure, extra corridor, extra iris door and (3) Chamber Wall 2 figures.
- Computer Station: This is large computer panel that you can add to the walls of the chamber or place anywhere.
- Console Station: This is a 1/4 circle computer control console with re-positionable consoles and posable parts.
- Core: The Core is a floor to ceiling structure with a re-positionable glass shield in the center. The glass shield can be moved out of view. There are three additional figures that can be combined with the Core.
- Core Cuffs: These are posable arm and leg cuffs with tentacle style armatures
- Core Restraints: This is a figure that can be added to the Core or used as a stand alone. The arm and leg cuffs/cuff bases are re-positionable.Pose files for M4 and V4 are provided for the cuffs and M4/V4. This figure can be combined with the core or used as a stand alone.
- Core Sphere: This is a power cell with ambient glow sphere in the center. This can be added to the Core figure.
- Drone 1: This is a posable drone/robot that can fly around the scene. The eye is posable as well as the 4 thrusters. You can add one of the tentacle tool arm to this figure.
- Gyro: This is a gyroscope style restraint machine. It is fully posable and has adjustment morphs on the stems of the cuffs. Pose files for V4 and M4 are provided in the pose library.
- Hover Table (m4 and v4 version): This is a fully articulated restraint table with a hover jet on the back. Pose files for M4 and V4 provided.
- Ladder: This is a simple 2 part ladder figure that you can add to any wall. This is useful for characters to use for stabilization in Zero-G environment.
- Light Ring: This is a posable ring of lights and monitors you can add to your scene. The small antennas on the ends of the light banks are re-positionable.
- Tool Tenta Arm: This is a posable tool armature with easypose bending technology.
- Tenta-Inject: This is a syringe style tool for injecting fluid into your characters. The vial can be repositioned.
- Tenta-Probe: This is a probe/laser tool tip. There is a small laser tip hidden just inside the tip of the probe that has a beam length morph.
- Tenta-Saw: This is a posable cutting saw tool tip.
- Tenta-Suction: This tool tip can be used as a milking device for breasts or as an umbillical cord type device, or a can be used to attach to the body or other figure.
- Tenta-Tongs: This is a tweezers/pincher type of device. The tong tips can be hidden to just have sharp metal tweezer tips. Each arm is posable.
- Tenta-* : This is a posable tentacle tool arm with the tools pre-parented to the tips.
- Tool Holder: This is a floating tool holder that can be used to attach the Tool Tentacles to (a pre-parented version is provided). There is a floating stem to move the figure around, remember, this is zero gravity. Inside the tool holder housing is a hidden lazer tip assembly. There is a pose file in the pose library to reveal the laser tip. Inside the tip of the laser is a morph adjustable beam. There is a pose file to hide and show the laser tip as well as a pose to hide the stem of the tool holder if you don't want to see it.
- Xtra Corridor: This is an extra circular corridor section with movable walls and ceiling. You can add these together and place them behind Chamber Wall 1 door.
- Xtra iris Door: This is an extra iris door with posable door segments. If you are using Poser 7 or higher, there is a master parameter pose dial that will open all the door segments at once.
Pre-Assemblies: There are some pre-assembled figures such as a console station ring attached to a null base (to move all the consoles together), a pre-assembled tool holder and pre-assembled Core features.
Props:
Smart prop back mounted mini propulsion jet pack for V4 and M4.
Pose files:
Pose files for all equipment and matching pose files for M4 and V4 are provided.
-Detailed Readme File.