- All files in .obj, .cr2, .png .jpg and .duf format.
----------------------------------------------------------------------------------------------------------------------
FIGURES FEATURES:
----------------------------
Blocks 1-4: These are simple rectangular blocks of different sizes. There are morph dials that you can
use to scale the width, height and depth of each block. There are pose files for the blocks and G8F in the Poses libraries for each block.
Block 5: This is a long block with a cut-out for your characters head. There are rebar posts in the front of
the opening that can be removed. 2 poses for G8F with matching load/pose for the Block 5 are included, one
for the block standing up and one for lying down.
Block 6: This is a display shelf style block. 3 pose files for G8F with matching load/pose for the Block 6 are
included.
Concrete Mix Bag: Simple bag with a couple of bending morphs. Good for scene clutter.
Concrete Mix Pile: A small pile of cement, good for scene clutter.
Concrete Pour: This is an easypose tube with bending control nodes every 10 segments. This can be used this to
make it appear that cement is pouring out of the cement mixer.
Form Box: This is a rectangular box with width, height, depth and support post height morphs. The box can
be adjusted to fit the rectangular blocks.
Hanger: This is a heavy duty hanger for hanging some blocks and rounds from. The post, beam and cross beam
have height or depth morphs for length control. The chains and their bases are symmetrical mirroring. There
are 2 free floating connector plates that you can place on your blocks or rounds, then pose the
chains to meet up with them. Hide the remaining bits of chaing by moving them out of view into the blocks or
rounds. 2 poses for G8F with matching load/pose for the Hanger and Block 3 are included.
Mixer (and Pour): This is a simple concrete mixer. The drum can spin and the armature holding the drum can turn by
turning the wheel. Inside the drum are 2 flat concrete planes, one is flat, one is at an angle, you can turn off the
one you don't need. The angled one is if you wanted to tilt the drum to pour out the concrete. There is a pre-parented Mixer and Pour figure supplied.
Shovel: Simple shovel good for scooping up cement and good for scene clutter.
Rounds 1 - 2: Simple cylindrical concrete rounds. Each has depth, roundness and thickness morphs. Pose files and matching pose files for G8F with matching load/poses for the Rounds are supplied.
Rounds 3 - 4: These are taller rounds with knock-outs for G8F's head, breasts and buttox/vagina. There is a depth morph for each to make them more elliptical. Round 4 has 2 sets of rebar bars that can be moved out of the way. Pose files included in the Poses library for G8F with matching load/poses for the Rounds.